pin up
英 [ˈpɪn ʌp]
美 [ˈpɪn ʌp]
钉住，用针别住
英英释义
verb
- attach with or as if with a pin
- pin up a picture
双语例句
- Pin feed: The method of feeding continuous stationery by lining up pins on the machines with a series of small holes in the paper.
圆钉给纸：边续表格的给纸方法。纸的两边打上连串小孔，对齐机器上的钉而被带动。 - Mg So also here we have now mg down, so we have at the pin mg up.
所以也有向下的力，图钉上的力mg向上。 - Finally, an independent project is executed in the Code Composer Studio. The result is that the LOW_PWR pin is drivened to high level and the processor can be made to enter the deep sleep mode or wake up at appropriate moment.
最后在CCS上设计并执行了一个独立工程，结果是引脚LOWPWR变为高电平，可以控制处理器在适当的时机进入深度睡眠模式或者唤醒。 - To cure pit collapse with residual soil from granite, what measure can be chose is to backfill with bags of sand and infiltrate steel tube or reinforce steel bar to pin up filler.
处理花岗岩残积土的基坑塌方，宜用砂袋回填并在纵横方向打入钢管或钢筋加固回填体。 - Fold along the bottom ( the middle line from the pattern,) pin the straps in place ( two ends of one strap in each seam) and match up the edges.
底部（从模式中线）折脚有何带（两带之一，每缝完）和匹配的边缘。 - Friction stir welding was conducted by using four types of pin and copper foils, piled up with aluminum plate alternately, as a tracer material.
采用镶嵌异种材料作为标识材料的方法，用不同搅拌针形状的搅拌头，进行了搅拌摩擦焊试验。 - The design and manufacture of a Ku-band up-converter module are introduced. The whole module is made up of a low phase-noise oscillator, a filter, a power divider, a power amplifier, a PIN switch, and a up-converter.
介绍了Ku波段上变频组件的设计与制作，整个组件由低相噪振荡器、滤波器、功分器、功率放大器、PIN开关、上变频器等部分组成。 - Edward: an hour? You make one hundred dollar an hour, you get a safty pin holding the boot up? You getta to be joking.
爱德华：一个小时？你一个小时挣一百美元，那你的鞋洞还用别针补起来？你一定是开玩笑。 - Instead of tracing a pattern on a screen or typing in a PIN, hold your Android device up and stare into its front-facing camera for a second to unlock it.
若要将安卓设备解锁，你不必在屏幕上滑动解锁图标或是输入个人识别码，只需把你的设备举起来，然后盯住它的前置摄像头一秒钟时间。 - Component parts with bore such as pin valve, internal thread, oil pipe take up a large proportion in the oil industry, chemical industry and modern manufacturing industry.
孔类零件如针阀体、内螺纹、油管等在石油、化工和现代制造业中占有相当大的比重。